manualshive.com logo in svg

Dell Force10 S4810P, Справочное руководство

Поделиться
Скачать
Dell Force10 S4810P Скачать руководство пользователя страница 819

Because each port can be assigned to only one Port Channel, and each Port Channel must have at least one port, some 
of those nominally available Port Channels might have no function because they could have no members if there are not 
enough ports installed. In the S-Series, those ports could be provided by stack members.

NOTE: The FTOS implementation of LAG or Port Channel requires that you configure a LAG on both switches 

manually. For information about FTOS link aggregation control protocol (LACP) for dynamic LAGs, refer to the 

Link 

Aggregation Control Protocol (LACP)

 chapter. For more information about configuring and using Port Channels, 

refer to the 

FTOS Configuration Guide

.

channel-member

Add an interface to the Port Channel, while in INTERFACE PORTCHANNEL mode.

C-Series, E-Series, S-Series, Z-Series, S4810

Syntax

channel-member 

interface

To delete an interface from a Port Channel, use the 

no channel-member interface 

command.

Parameters

interface

(OPTIONAL) Enter any of the following keywords and slot/port or 
number information:

•

For a 100/1000 Ethernet interface, enter the keyword 

GigabitEthernet

 followed by the slot/port information.

•

For a Gigabit Ethernet interface, enter the keyword 

GigabitEthernet

 followed by the slot/port information.

•

For a SONET interface, enter the keyword 

sonet

 followed by 

the slot/port information.

•

For a 10-Gigabit Ethernet interface, enter the keyword 

TenGigabitEthernet

 followed by the slot/port 

information.

•

For a 40-Gigabit Ethernet interface, enter the keyword 

fortyGigE

 followed by the slot/port information.

Defaults

Not configured.

Command Modes

INTERFACE PORTCHANNEL

Command History

Version 8.3.11.1

Introduced on the Z9000.

Version 8.5.1.0

Added support for 4-port 40G line cards on ExaScale.

Version 8.3.7.0

Introduced on the S4810.

Version 8.1.1.0

Introduced on the E-Series ExaScale.

Version 7.6.1.0

Introduced on the S-Series.

Version 7.5.1.0

Introduced on the C-Series.

pre-Version 
6.2.1.0

Introduced on the E-Series.

Usage 
Information

Use the 

interface port-channel

 command to access this command.

819

Содержание Force10 S4810P






































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды