Dell Force10 S4810P, Справочное руководство

Страница: 1061 / 1637

fefd disable
Disable FEFD on an interface only. This command overrides the
fefd reset
command for the interface.
E-Series, S4810
Syntax fefd disable
To re-enable FEFD on an interface, use the
no fefd disable
command.
Defaults Not configured.
Command Modes INTERFACE
Command History
Version 8.3.12.0 Introduced on the S4810.
Legacy E-Series
command.
Usage
Information When you enter
no fefd
for an interface and fefd-global, FEFD is enabled on the interface
because the
no fefd
command is not retained in the configuration file. To keep the interface
FEFD disabled when the global configuration changes, use the
fefd reset
command.
Related
Commands
• fefd reset – enables FEFD globally on the system.
• fefd mode – changes FEFD mode on an interface.
fefd interval
Set an interval between control packets.
E-Series, S4810
Syntax fefd interval seconds
To return to the default value, use the
no fefd interval
command.
Parameters
seconds
Enter a number as the time between FEFD control packets. The range
is 3 to 300 seconds. The default is 15 seconds.
Defaults 15 seconds
Command Modes INTERFACE
Command History
Version 8.3.12.0 Introduced on the S4810.
Legacy E-Series
command.
Related
Commands
• fefd – enables far-end failure detection.
1061