Dell Force10 S4810P, Справочное руководство

Страница: 116 / 1637

Parameters
interval
seconds
Enter the keyword
interval
followed by the polling interval in
seconds. Range: 120 to 6000 seconds. Default: 300 seconds (5
minutes).
Defaults Disabled
Command Modes CONFIGURATION
Command History
Version 8.3.11.4 Deprecated command for Z9000 only. Replaced by the
enable
optic-info-update interval
command to update
information on temperature and power monitoring in the SNMP MIB.
Version 8.3.10.0 Deprecated command for the S4810 only. Replaced by the
enable
optic-info-update interval
command to update
information on temperature and power monitoring in the SNMP MIB.
Version 8.1.1.0 Introduced on the E-Series ExaScale.
Version 7.6.1.0 Introduced on the S-Series.
Version 7.5.1.0 Introduced on the C-Series and E-Series.
Usage
Information The chassis MIB contains the entry
chSysXfpRecvPower
in the
chSysPortTable
table. Periodically, IFA polls the XFP power for each of the ports and sends the values to IFM
where it is cached.
Use this command to enable polling and to configure the polling frequency.
end
Return to EXEC Privilege mode from other command modes (for example, CONFIGURATION or ROUTER OSPF modes).
C-Series, E-Series, S-Series, Z-Series
Syntax end
Command Modes
• CONFIGURATION
• SPANNING TREE
• MULTIPLE SPANNING TREE
• LINE
• INTERFACE
• TRACE-LIST
• VRRP
• ACCESS-LIST
• PREFIX-LIST
• AS-PATH ACL
• COMMUNITY-LIST
116