Dell Force10 S4810P, Справочное руководство

Страница: 1076 / 1637

show lldp neighbors
Display LLDP neighbor information for all interfaces or a specified interface.
C-Series, E-Series, S-Series, Z-Series, S4810
Syntax show lldp neighbors [ interface ] [detail]
Parameters
interface
(OPTIONAL) Enter the following keywords and slot/port or number
information:
• For a Fast Ethernet interface, enter the keyword
FastEthernet
followed by the slot/ port information.
• For a 1-Gigabit Ethernet interface, enter the keyword
gigabitEthernet
followed by the slot/port information.
• For a 10-Gigabit Ethernet interface, enter the keyword
tenGigabitEthernet
followed by the slot/port
information.
• For a 40-Gigabit Ethernet interface, enter the keyword
fortyGigE
followed by the slot/port information.
detail (OPTIONAL) Enter the keyword
detail
to display all the TLV
information, remote management IP addresses, timers, and LLDP tx
and rx counters.
Defaults none
Command Modes EXEC Privilege
Command History
Version 9.1.(0.0) Modified output of detail parameter to display remote management IP
addresses.
Version 8.3.11.1 Introduced on the Z9000.
Version 8.5.1.0 Added support for 4-port 40G line cards on ExaScale.
Version 8.3.7.0 Introduced on the S4810.
Version 7.7.1.0 Introduced on the S-Series.
Version 7.6.1.0 Introduced on the C-Series.
Version 7.4.1.0 Introduced on the E-Series.
Usage
Information Omitting the keyword
detail
displays only the remote chassis ID, Port ID, and Dead Interval.
Example
R1(conf-if-gi-1/31)#do show lldp neighbors
Loc PortID Rem Host Name Rem Port Id Rem Chassis Id
--------------------------------------------------------------
Gi 1/21 R2 GigabitEthernet 2/11 00:01:e8:06:95:3e
Gi 1/31 R3 GigabitEthernet 3/11 00:01:e8:09:c2:4a
1076