Dell Force10 S4810P, Справочное руководство

Страница: 543 / 1637

local-distance
Enter a number to assign to routes learned from networks listed in the
network
command. The range is 1 to 255. The default is 200.
Defaults
•
external-distance
= 20
•
internal-distance
= 200
•
local-distance
= 200
Command Modes ROUTER BGPV6-ADDRESS FAMILY
Command History
Version 7.4.1.0 Introduced
Usage
Information
CAUTION: Dell Force10 recommends that you do not change the administrative distance of
internal routes. Changing the administrative distances may cause routing table
inconsistencies.
The higher the administrative distance assigned to a route means that your confidence in that
route is low. Routes assigned an administrative distance of 255 are not installed in the routing
table.
Routes from confederations are treated as internal BGP routes.
neighbor activate
This command allows the specified neighbor/peer group to be enabled for the current AFI/SAFI.
E-Series
Syntax neighbor [ ipv6-address | peer-group-name ] activate
To disable, use the
no neighbor [ ipv6-address | peer-group-name ]
activate
command.
Parameters
ipv6-address
Enter the IPv6 address in the x:x:x:x::x format.
NOTE: The :: notation specifies successive hexadecimal fields of
zeros.
peer-group-name
Identify a peer group by name.
activate Enter the keyword
activate
to enable the identified neighbor or
peer group in the new AFI/SAFI.
Defaults Disabled.
Command Modes ROUTER BGPV6-ADDRESS FAMILY
Command History
Version 7.4.1.0 Introduced
Usage
Information By default, when you create a neighbor/peer group configuration in the Router BGP context, it
is enabled for the IPv6/Unicast AFI/SAFI. By using activate in the new context, the neighbor/
peer group is enabled for AFI/SAFI.
543