Dell Force10 S4810P Скачать руководство пользователя страница 846

Страница: 846 / 1637

To disable debugging, use the

no debug ip icmp

command.

Parameters

interface

(OPTIONAL) Enter the following keywords and slot/port or number
information:

•

For a 1-Gigabit Ethernet interface, enter the keyword

GigabitEthernet

followed by the slot/port information.

•

For the Management interface, enter the keyword

ManagementEthernet

followed by the slot/port

information. The slot range is 0-1 and the port range is 0.

•

For a Port Channel interface, enter the keywords

port-

channel

followed by a number. For the C-Series and S-

Series, the range is 1 to 128. For the E-Series, the range is 1 to

255 for TeraScale and 1 to 512 for ExaScale.

•

For a SONET interface, enter the keyword

sonet

followed by

the slot/port information.

•

For a 10-Gigabit Ethernet interface, enter the keyword

TenGigabitEthernet

followed by the slot/port

information.

•

For a 40-Gigabit Ethernet interface, enter the keyword

fortyGigE

followed by the slot/port information.

•

For a VLAN, enter the keyword

vlan

followed by a number

from 1 to 4094.

count

value

(OPTIONAL) Enter the keyword

count

followed by the count value.

The range is 1 to 65534. The default is Infinity.

Command Modes

EXEC Privilege

Command History

Version 8.3.11.1

Introduced on the Z9000.

Version 8.5.1.0

Added support for 4-port 40G line cards on ExaScale.

Version 8.3.7.0

Introduced on the S4810.

Version 8.2.1.0

Added support for 4094 VLANs on the E-Series ExaScale (the prior
limit was 2094).

Version 8.1.1.0

Introduced on the E-Series ExaScale.

Version 7.6.1.0

Introduced on the S-Series.

Version 7.5.1.0

Introduced on the C-Series.

Version 6.3.1.0

Added the

count

option.

Example

ICMP: echo request rcvd from src 40.40.40.40

ICMP: src 40.40.40.40, dst 40.40.40.40, echo reply

ICMP: echo request sent to dst 40.40.40.40

ICMP: echo request rcvd from src 40.40.40.40

ICMP: src 40.40.40.40, dst 40.40.40.40, echo reply

ICMP: echo request sent to dst 40.40.40.40

846

Содержание Force10 S4810P






































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































Результаты поиска

Содержание Force10 S4810P

Отзывы:

Бренды по названию

Популярные бренды

Dell Force10 S4810P, Справочное руководство

Результаты поиска

Содержание Force10 S4810P

Отзывы:

Бренды по названию

Популярные бренды