Dell Force10 S4810P, Справочное руководство

Страница: 850 / 1637

ip address
Assign a primary and secondary IP address to the interface.
C-Series, E-Series, S-Series, Z-Series, S4810
Syntax ip address ip-address mask [secondary]
To delete an IP address from an interface, use the
no ip address [ ip-address ]
command.
Parameters
ip-address
Enter an IP address in dotted decimal format.
mask
Enter the mask of the IP address in slash prefix format (for example, /
24).
secondary (OPTIONAL) Enter the keyword
secondary
to designate the IP
address as the secondary address.
Defaults Not configured.
Command Modes INTERFACE
Command History
Version 8.3.11.1 Introduced on the Z9000.
Version 8.3.7.0 Introduced on the S4810.
Version 8.1.1.0 Introduced on the E-Series ExaScale.
Version 7.6.1.0 Introduced on the S-Series.
Version 7.5.1.0 Introduced on the C-Series.
Usage
Information You must be in INTERFACE mode before you add an IP address to an interface. Assign an IP
address to an interface prior to entering ROUTER OSPF mode.
ip directed-broadcast
Enables the interface to receive directed broadcast packets.
C-Series, E-Series, S-Series, Z-Series, S4810
Syntax ip directed-broadcast
To disable the interface from receiving directed broadcast packets, use the
no ip
directed-broadcast
command.
Defaults Disabled (that is, the interface does not receive directed broadcast packets)
Command Modes INTERFACE
Command History
Version 8.3.11.1 Introduced on the Z9000.
850