Dell Force10 S4810P, Справочное руководство

Страница: 141 / 1637

console Enter the keyword
console
to send a message to the primary
terminal line.
vty Enter the keyword
vty
to send a message to the virtual terminal.
Defaults none
Command Modes EXEC
Command History
Version 8.3.11.1 Introduced on the Z9000.
Version 8.1.1.0 Introduced on the E-Series ExaScale.
Version 7.6.1.0 Introduced on the S-Series.
Version 7.5.1.0 Introduced on the C-Series.
Version 6.5.1.0 Introduced on the E-Series.
Usage
Information Messages can contain an unlimited number of lines; however, each line is limited to 255
characters. To move to the next line, use the
<CR>
. To send the message use
CTR-Z
;to abort
a message use
CTR-C
.
service timestamps
Add time stamps to debug and log messages. This command adds either the uptime or the current time and date.
C-Series, E-Series, S-Series, Z-Series
Syntax service timestamps [debug | log] [datetime [localtime] [msec]
[show-timezone] | uptime]
To disable timestamping, use the
no service timestamps [debug | log]
command.
Parameters
debug (OPTIONAL) Enter the keyword
debug
to add timestamps to debug
messages.
log (OPTIONAL) Enter the keyword
log
to add timestamps to log
messages with severity 0 to 6.
datetime (OPTIONAL) Enter the keyword
datetime
to have the current time
and date added to the message.
localtime (OPTIONAL) Enter the keyword
localtime
to include the localtime
in the timestamp.
msec (OPTIONAL) Enter the keyword
msec
to include milliseconds in the
timestamp.
show-timezone (OPTIONAL) Enter the keyword
show-timezone
to include the
time zone information in the timestamp.
141