Dell Force10 S4810P, Справочное руководство

Страница: 502 / 1637

NOTE: There is a 140-character limit for prefix list names.
Defaults none
Command Modes CONFIGURATION
Command History
Version 9.0.0.0 Introduced on the Z9000.
Version 8.3.10.0 Introduced on the S4810.
Related
Commands show ipv6 prefix-list – View the selected IPv6 prefix-list.
maximum-paths
Configure the maximum number of parallel routes (multipath support) BGP supports.
C-Series, E-Series
Syntax maximum-paths {ebgp | ibgp} number
To return to the default values, use the
no maximum-paths
command.
Parameters
ebgp Enter the keyword
ebgp
to enable multipath support for External BGP
routes.
ibgp Enter the keyword
ibgp
to enable multipath support for Internal BGP
routes
number
Enter a number as the maximum number of parallel paths. The range
is 1 to 16. The default is 1.
Defaults 1
Command Modes ROUTER BGPV6-ADDRESS FAMILY
Command History
Version 8.2.1.0 Introduced on the E-Series ExaScale.
Version 7.4.1.0 Introduced
Usage
Information If you enable this command, use the
clear ip bgp
command to recompute the best path.
neighbor activate
This command allows the specified neighbor/peer group to be enabled for the current AFI/SAFI.
C-Series, E-Series
Syntax neighbor { ipv6-address | peer-group-name } activate
To disable, use the
no neighbor { ipv6-address | peer-group-name }
activate
command.
502