Dell Force10 S4810P, Справочное руководство

Страница: 138 / 1637

NOTE: This option is supported on the E-Series only.
Defaults Disabled.
Command Modes EXEC Privilege
Command History
Version 8.1.1.2 Introduced on the E-Series ExaScale E600i.
Version 8.1.1.0 Introduced on the E-Series ExaScale E1200i.
Version 7.5.1.0 Introduced on the C-Series.
E-Series Original command.
Related
Commands power-off – powers off a line card or standby SFM.
reload
Reboot FTOS.
C-Series, E-Series, S-Series, Z-Series, S4810
Syntax reload [conditional nvram-cfg-change ]
Parameters
conditional
nvram-cfg-
change
Reload if the condition is true. A configuration change to the nvram
requires a switch reload. You must select
nvram-cfg-change
to
reload the switch.
Command Modes EXEC Privilege
Command History
Version 9.1(0.0) Added ‘conditional’ parameter.
Version 8.3.11.1 Introduced on the Z9000.
Version 7.6.1.0 Introduced on the S-Series.
Version 7.5.1.0 Introduced on the C-Series.
E-Series Original command.
Usage
Information If there is a change in the configuration, FTOS prompts you to save the new configuration. Or
you can save your running configuration with the
copy running-config
command.
For information related to the BMP reload options, refer to the Bare Metal Provisioning (BMP)
chapter.
Use the conditional parameter if any configuration changes made to the nvram, such as stack-
group and fanout configurations, must be saved.
Related
Commands
• reset – resets a line card, RPM, or a failed SFM (TeraScale and ExaScale).
138