Dell Force10 S4810P, Справочное руководство

Страница: 368 / 1637

Parameters
ip-address
Enter an IP address in dotted decimal format to reset only that BGP
neighbor.
Defaults The router ID is the highest IP address of the Loopback interface or, if no Loopback interfaces
are configured, the highest IP address of a physical interface on the router.
Command Modes ROUTER BGP
Command History
Version 8.3.11.1 Introduced on the Z9000.
Version 8.3.7.0 Introduced on the S4810.
Version 7.8.1.0 Introduced on the S-Series.
Version 7.7.1.0 Introduced on the C-Series.
Usage
Information
Peering sessions are reset when you change the router ID of a BGP router.
bgp soft-reconfig-backup
Use this command
only
when route-refresh is
not
negotiated to avoid the peer from resending messages.
C-Series, E-Series, S-Series, Z-Series, S4810
Syntax bgp soft-reconfig-backup
To return to the default setting, use the
no bgp soft-reconfig-backup
command.
Defaults Off
Command Modes ROUTER BGP
Command History
Version 9.1(0.0) Added support for IPv6.
Version 8.3.11.1 Introduced on the Z9000.
Version 8.3.7.0 Introduced on the S4810.
Version 7.8.1.0 Introduced on the S-Series.
Version 7.7.1.0 Introduced on the C-Series.
Version 7.2.1.0 Introduced.
Usage
Information
When you enable soft-reconfiguration for a neighbor and you execute the
clear ip bgp
soft in
command, the update database stored in the router is replayed and updates are
reevaluated. With this command, the replay and update process is triggered only if route-
refresh request is not negotiated with the peer. If the request is indeed negotiated (after
executing the
clear ip bgp soft in
command), BGP sends a route-refresh request to
the neighbor and receives all of the peer’s updates.
Related
Commands clear ip bgp – activates inbound policies without resetting the BGP TCP session.
368