Dell Force10 S4810P, Справочное руководство

Страница: 1524 / 1637

• show hardware stack-unit – displays the data plane or management plane input and
output statistics of the designated component of the designated stack member.
• show system (S-Series) – displays the current status of all stack members or a specific
member.
• upgrade (S-Series management unit) – upgrades the bootflash image or system image
of the S-Series management unit.
stack-unit priority
Configure the ability of an S-Series switch to become the management unit of a stack.
S-Series
Syntax stack-unit 0-7 priority 1-14
Parameters
0–7 Enter the stack member unit identifier, from 0 to 7, of the switch on
which you want to set the management priority.
1–14 This preference parameter allows you to specify the management
priority of one backup switch over another, with 0 the lowest priority
and 14 the highest. The switch with the highest priority value is
chosen to become the management unit if the active management
unit fails or on the next reload.
Defaults 0
Command Modes CONFIGURATION
Command History
Version 7.7.1.0 Introduced on the S-Series.
Related
Commands
• reload – reboots FTOS.
• show system (S-Series) – displays the status of all stack members or a specific
member.
stack-unit provision
Preconfigure a logical stacking ID of a switch that joins the stack. This is an optional command that is executed on the
management unit.
S-Series
Syntax stack-unit 0-11 provision {S25N|S25P|S25V|S50N|S50V|S4810}
1524