Dell Force10 S4810P, Справочное руководство

Страница: 1004 / 1637

Command Modes
• ROUTER ISIS (
for IPv4
)
• CONFIGURATION-ROUTER-ISIS-ADDRESS-FAMILY-IPV6 (
for IPv6
)
Command History
Version 8.3.12.0 Introduced on the S4810.
Version 7.5.1.0 Added support for IPv6 ISIS.
Version 6.3.1.0 Introduced.
Usage
Information BGP to IS-IS redistribution supports “match” options using route maps. You can set the metric
value, level, and metric-type of redistributed routes by the redistribution command. You can
“set” more advanced options using route maps.
Example
FTOS(conf)#router is
FTOS(conf-router_isis)#redistribute bgp 1 level-1 metric 32
metric-type
external route-map rmap-isis-to-bgp
FTOS(conf-router_bgp)#show running-config isis
!
router isis
redistribute bgp 1 level-1 metric 32 metric-type external
route-map
rmap-isis-to-bgp
redistribute ospf
Redistribute routing information from an OSPF process.
E-Series, S4810
Syntax redistribute ospf process-id [level-1| level-1-2 | level-2]
[match {internal | external}] [metric metric-value ] [metric-
type {external | internal}] [route-map map-name ]
To return to the default values, use the
no redistribute ospf process-id
[level-1| level-1-2 | level-2] [match {internal | external}]
[metric
metric-value ][metric-type {external | internal}]
[route-map map-name ]
command.
Parameters
process-id
Enter a number that corresponds to the OSPF process ID to be
redistributed. The range is 1 to 65355.
metric
metric-
value
(OPTIONAL) The value used for the redistributed route. Use a metric
value that is consistent with the destination protocol. The range is 0
to 16777215. The default is 0.
metric-type
{external |
internal} (OPTIONAL) The external link type associated with the default route
advertised into a routing domain. The two options are:
•
external
1004