Dell Force10 S4810P, Справочное руководство

Страница: 150 / 1637

Version 7.6.1.0 Introduced on the S-Series.
Version 7.5.1.0 Introduced on the C-Series
E-Series Original command.
Example
FTOS#show debug
Generic IP:
IP packet debugging is on for
ManagementEthernet 0/0
Port-channel 1-2
Port-channel 5
GigabitEthernet 4/0-3,5-6,10-11,20
GigabitEthernet 5/0-1,5-6,10-11,15,17,19,21
ICMP packet debugging is on for
GigabitEthernet 5/0,2,4,6,8,10,12,14,16
FTOS#
show environment (C-Series and E-Series)
View the system component status (for example, temperature or voltage).
C-Series, E-Series
Syntax show environment [all | fan | linecard | linecard-voltage | PEM
| RPM | SFM]
Parameters
all Enter the keyword
all
to view all components.
fan Enter the keyword
fan
to view information on the fans. The output of
this command is chassis dependent.
Refer to the Examples for the
show chassis
,
show command-
history
, and
show cpu-traffic-stats
commands for a
comparison of output.
linecard Enter the keyword
linecard
to view only information on line cards.
linecard-voltage Enter the keyword
linecard-voltage
to view line card voltage
information.
PEM Enter the keyword
pem
to view only information on power entry
modules.
RPM Enter the keyword
rpm
to view only information on RPMs.
SFM Enter the keyword
sfm
to view only information on SFMs.
NOTE: This option is supported on the E-Series only.
Command Modes
• EXEC
• EXEC Privildge
150