Dell Force10 S4810P, Справочное руководство

Страница: 485 / 1637

Parameters
neighbor
ip-
address
|
peer-
group-name
Enter the keyword
neighbor
followed by one of the options listed
below:
•
ip-address
of the neighbor in IP address format of the
neighbor.
•
peer-group-name
of the neighbor peer group.
restart-time
seconds
Enter the keywords
restart-time
followed by the maximum
number of seconds needed to restart and bring up all peers. The
range is 1 to 3600 seconds. The default is 120 seconds.
stale-path-time
seconds
Enter the keywords
stale-path-time
followed by the maximum
number of seconds to wait before restarting a peer’s stale paths. The
default is 360 seconds.
role receiver-only Enter the keywords
role receiver-only
to designate the local
router to support graceful restart as a receiver only.
Defaults As above.
Command Modes ROUTER BGP
Command History
Version 8.2.1.0 Introduced on the E-Series ExaScale.
Version 7.4.1.0 Introduced
Usage
Information This feature is advertised to BGP neighbors through a capability advertisement. In Receiver
Only mode, BGP saves the advertised routes of peers that support this capability when they
restart.
bgp log-neighbor-changes
Enable logging of BGP neighbor resets.
C-Series, E-Series
Syntax bgp log-neighbor-changes
To disable logging, use the
no bgp log-neighbor-changes
command.
Defaults Enabled.
Command Modes ROUTER BGP
Command History
Version 8.2.1.0 Introduced on the E-Series ExaScale.
Version 7.4.1.0 Introduced
Usage
Information The
bgp log-neighbor-changes
command appears in the
show config
command
output.
Related
Commands show config – views the current configuration.
485