Mitsubishi Electric GOT2000 Series, Connection Manual

Page: 677 / 1224

12.4 PLC Side Setting
12 - 35
CC-Link
C
O
NN
ECTION (INTELLIGE
NT DEVICE ST
A
T
ION)
12
12.4.6 Connecting to CC-Link module (Q Series) with Ver.2 compatible
This section describes the settings of the GOT and CC-Link module (Q Series) in the following case of system configuration.
POINT POINT POINT
CC-Link module (Q Series)
For details of the CC-Link module (Q Series), refer to the following manual.
➠ CC-Link System Master/Local Module User's Manual QJ61BT11N
■1.
System configuration
*1 The CC-Link module is mounted on the base unit slot 0.
The Start I/O No. of the CC-Link module is set to "0"
POINT POINT POINT
When connecting to Q170MCPU or Q170MSCPU(-S1)
When connected to Q170MCPU or Q170MSCPU(-S1), the start I/O No. of the CC-Link module is
set to "70".
<CC-Link module>
*1
Type : Master station
Station No. : Station No.0
Mode : Remote net (Ver.2 mode)
All connect count : 1
Transmission speed : 156kbps
<GOT>
(Use the default value for settings other
than the following.)
Station type : Intelligent device
station
Station No. : Station No.1
Expanded cyclic setting : Single
Number of
stations occupied
: Exclusive station 1
Transmission speed : 156kbps
(Use the default value for the settings other than the following.)