Mitsubishi Electric GOT2000 Series, Connection Manual

Page: 164 / 1224

3 - 10
3.1 Access Range for Monitoring Stations on Network Systems
Example 3: When using CPU direct connection or serial communication connection
• Monitor accessible range of devices (other than B or W) of other stations or other networks
Specify the accessing network No. or station as shown in the following table.
(1) To monitor B or W of the connected station (host station) assigned with a network parameter,
specify the host station.
(2) To monitor another station (other than B or W) or another network, specify the station (network
No. and station No.).
POINT POINT POINT
Monitoring link device B or W
For monitoring devices B and W that are allocated by the link parameter, use the host device
number even when designating devices allocated to another station.
Otherwise, the display speed will be reduced.
Station connected to GOT
Station to be accessed
Network No.1 Network No.2
AnU (1-1)
Q(Q mode)
(1-2)
AnA (1-3) AnU (1-4) QnA (2-1) AnU (2-2) AnN (2-3) AnU (2-4)
AnU (1-1)
Host ── Other (1-3) Other (1-4) ── Other (2-2) ── ──
Q (Q mode) (1-2)
Other (1-1) Host ── Other (1-4) Other (2-1) Other (2-2) ── Other (2-4)
AnA (1-3)
Other (0-0) ── Host ── ── ── ── ──
AnU (1-4) (2-2)
Other (1-1) ── ── Host ── Host ── ──
QnA (2-1)
Other (1-1) Other (1-2) ── Other (1-4) Host Other (2-2) Other (2-3) Other (2-4)
AnN (2-3)
── ── ── ── ── ── Host ──
AnU (2-4)
── ── ── ── ── Other (2-2) ── Host
How to read the table
Upper line:
Lower line:
Accessibility
: Accessible
: Not accessible
Network settings
Host
Other (Network No. - Station number)
Control station Control station
Network No.1 Network No.2
AnU
(1-1)
Q(Q mode)
(1-2)
AnA
(1-3)
AnN
(2-3)
AnU
(2-4)
QnA
(2-1)
AnU
(1-4)
(2-2)