Mitsubishi Electric GOT2000 Series, Connection Manual

Page: 1067 / 1224

22.2 Compatible Software
22 - 11
22
FA TRANSP
ARE
NT FU
NCTION
(3) When connecting the GOT and PLC in Ethernet communication
The following shows the software and the accessible PLC CPUs.
*1 Only QCPU can be connected. To connect to QnA/ACPU, connect via QCPU.
*2 GX Developer Version 8.118Y or later is required to use the FA transparent function.
*3 GX Works2 Version 1.10L or later is required to use the FA transparent function.
*4 MT Works2 Version 1.08J or later is required to use the FA transparent function.
*5 MELSOFT Navigator Version 1.04E or later is required to use the FA transparent function.
*6 GX Works2 Version 1.11M or later is required to use the FA transparent function.
*7 MT Works2 Version 1.12N or later is required to connect with Q17nDCPU-S1.
*8 MELSOFT Navigator Version 1.07H or later is required to use the FA transparent function.
*9 MX Component Version 4.03D or later is required to use the FA transparent function.
*10 Use MX Component Version 3.14Q or later for MX Sheet.
*11 Use CPU Module Logging Configuration Tool Version 1.04E or later.
*12 GX Works2 Version 1.98C or later is required to use the FA transparent function.
*13 MT Works2 Version 1.100E or later is required to use the FA transparent function.
*14 MX Component Version 4.06G or later is required to use the FA transparent function.
*15 MX Sheet, please use the MX Component (Version 4.06G or later).
*16 GX Works3 Version 1.005F or later is required to use the FA transparent function.
*17 MX Component Version 4.11M or later is required to use the FA transparent function.
*18 MX Sheet, please use the MX Component (Version 4.11M or later).
*19 GX Works3 Version 1.030G or later is required to use the FA transparent function for the RCPU redundant system.
*20 RT ToolBox2 Version 3.00 or later is required to use the FA transparent function.
PLC CPU Software
RCPU
GX Works3
*19
, MX Component
*14
, MX Sheet
*15
Motion controller CPU
(MELSEC iQ-R Series)
MT Works2
*13
, MX Component
*14
, MX Sheet
*15
Robot controller (CR800-R, CR800-D) RT ToolBox3
C controller module (MELSEC iQ-R Series) CW Configurator
FX5U, FX5UC
GX Works3
*16
, MX Component
*17
,MX Sheet
*18
QCPU (Q mode)
*1
,
C Controller module (Q Series)
MELSOFT Navigator
*5
GX Developer
*2
GX Works2
*3
MX Component
*9
, MX Sheet
*10
LCPU
MELSOFT Navigator
*8
GX Developer
*2
GX Works2
*6
GX LogViewer
MX Component
*9
, MX Sheet
*10
, CPU Module Logging Configuration Tool
*11
FXCPU
GX Works2
*13
Motion controller CPU (Q Series)
MELSOFT Navigator
*5
SW6RN-GSV13P, SW6RN-GSV22P, SW6RN-GSV43P,
SW6RN-GSV54P, SW6RN-DOSCP, SW6RN-SNETP (for user API)
MT Works2
*4*7
Robot controller (CRnQ-700, CRnD-700)
RT ToolBox2
*20
, RT ToolBox3