Mitsubishi Electric GOT2000 Series, Connection Manual

Page: 598 / 1224

10 - 20
10.4 PLC Side Setting
10.4.2 Connecting to C Controller module (MELSEC iQ-R Series)
This section describes the settings of the GOT and C Controller module (MELSEC iQ-R Series) in the following case of
system configuration.
Use CW Configurator for the C Controller module (MELSEC iQ-R Series) communication settings.
■1.
System configuration1 (Network Type: CC IE Control)
*1 The CC-Link IE Controller Network module is mounted on slot 0 of the base unit.
The start I/O No. of the CC-Link IE Controller Network module is set at [0].
■2.
System configuration1 (Network Type: CC IE Control extended mode)
*1 The CC-Link IE Controller Network module is mounted on slot 0 of the base unit.
The start I/O No. of the CC-Link IE Controller Network module is set at [0].
<CC-Link IE Controller Network module>
(Use the default value for settings other than the following.)
Station No.
:1
Mode Setting :Online
Network type :CC IE Control (Control station)
Network No. :1
Total stations :2
Network range assignment :LB0000
H
to LB00FF
H
LW00000
H
to LW000FF
H
CC-Link IE Controller Network module
<GOT>
(Use the default value for settings other than
the following.)
Network type :CC IE Control
Network No. :1
Station No. :2
Mode Setting :Online
(auto. reconnection)
Network range assignment :LB0100
H
to LB01FF
H
LW00100
H
to
LW001FF
H
Monitor Speed
:High
*1
<CC-Link IE Controller Network module>
(Use the default value for settings other than the following.)
Station No.
:1
Mode Setting :Online
Network type :CC IE Control extended mode
(Control station)
Network No. :1
Total stations :2
Network range assignment :LB0000
H
to LB00FF
H
LW00000
H
to LW000FF
H
CC-Link IE Controller Network
<GOT>
(Use the default value for settings other than
the following.)
Network type :CC IE Control
extended mode
Network No. :1
Station No. :2
Mode Setting
:Online
(auto. reconnection)
Network range assignment :LB0100
H
to LB01FF
H
LW00100
H
to
LW001FF
H
Monitor Speed :High
*1