Mitsubishi Electric GOT2000 Series, Connection Manual

Page: 110 / 1224

2 - 26
2.1 MELSEC iQ-R, RnMT/NC/RT, CR800-D (GT27, GT25 only)
• Linear servo motor/DD motor setting parameter
*1 For the parameters prefixed by an asterisk (*), setting becomes effective when the power is turned off once and back on after
setting the parameter data.
*2 Compatible with MR-JE- □ BF and MR-J4-GF(-RJ).
• Network setting parameter (MR-J4- □ GF(-RJ) only)
*1 For the parameters prefixed by an asterisk (*), setting becomes effective when the power is turned off once and back on after
setting the parameter data.
Device name
Item
*2
Symbol
*1
PL1, PL1001
Linear servo motor/DD motor function selection
1
**LIT1
PL2, PL1002 Linear encoder resolution - Numerator **LIM
PL3, PL1003 Linear encoder resolution - Denominator **LID
PL4, PL1004
Linear servo motor/DD motor function selection
2
*LIT2
PL5, PL1005 Position deviation error detection level LB1
PL6, PL1006 Speed deviation error detection level LB2
PL7, PL1007 Torque/thrust deviation error detection level LB3
PL8, PL1008
Linear servo motor/DD motor function selection
3
*LIT3
PL9, PL1009 Magnetic pole detection voltage level LPWM
PL10 to PL16, PL1010 to PL1016 For manufacturer setting -
PL17, PL1017
Magnetic pole detection - Minute position
detection method - Function selection
LTSTS
PL18, PL1018
Magnetic pole detection - Minute position
detection method - Identification signal
amplitude
IDLV
PL19 to PL48, PL1019 to PL1048 For manufacturer setting -
Device name Item
Symbol
*1
PN01, PN1001 For manufacturer setting -
PN02, PN1002 Communication error detection time CERT
PN03, PN1003 Communication mode setting for CC-Link IE communication **NEMD
PN04, PN1004 CC-Link IE communication network number **NENO
PN05, PN1005 Communication error detection frequency setting CERI
PN06, PN1006 Function selection N-1 NOP1
PN07 to PN32, PN1007 to PN1032 For manufacturer setting -