Mitsubishi Electric GOT2000 Series, Connection Manual

Page: 1059 / 1224

22.2 Compatible Software
22 - 3
22
FA TRANSP
ARE
NT FU
NCTION
22.2 Compatible Software
The following shows the software compatible with the FA transparent function.
POINT POINT POINT
(1) The range accessible by software when FA transparent function is used
Use of the FA transparent function does not affect the range accessible by the software.
For details on accessible range, refer to the manual for the respective software.
(2) The software settings when using FA transparent function
For the software settings, refer to the following when using FA transparent function.
➠
22.7.1 Accessing by GX Works3
➠ 22.7.2 Accessing by CW Configurator
➠
22.7.3 Accessing the PLC by the PX Developer, GX Configurator
➠ 22.7.4 Accessing by GX Works2
➠
22.7.5 Accessing by GX LogViewer
➠ 22.7.6 Accessing PLC by GX Configurator-QP
➠
22.7.7 Accessing by the MT Developer
➠ 22.7.8 Accessing by the MT Works2
➠
22.7.9 Accessing the servo amplifier by the MR Configurator
➠ 22.7.10 Accessing the servo amplifier by the MR Configurator2
➠
22.7.11 Accessing the inverter by the FR Configurator
➠ 22.7.12 Accessing PLC by FX Configurator-FP
➠
22.7.13 Accessing by FX3U-ENET-L Configuration tool
➠ 22.7.14 Accessing by RT ToolBox3
➠
22.7.15 Accessing by RT ToolBox2
➠ 22.7.16 Accessing by NC Configurator2
➠
22.7.17 Accessing by MELSOFT Navigator
➠ 22.7.18 Accessing by CPU Module Logging Configuration Tool
➠
22.7.19 Accessing by Setting/ Monitoring tool for C Controller module
➠ 22.7.20 Accessing by MX Component (MX Sheet)