Mitsubishi Electric GOT2000 Series, Connection Manual

Page: 804 / 1224

14 - 48
14.3 Ethernet Connection
■2.
Communication detail settings
Make the settings according to the usage environment.
*1 Each of [GOT Station] set in the communication detail setting and [Station] set in the Ethernet setting must be set to different
station numbers.
➠ ■4.
Ethernet setting
■3.
GOT Ethernet Setting
The GOT can be connected to a different network by configuring the following setting.
(1) GOT IP address setting
Set the following communication port setting.
• Standard port (When using GT25-W, port 1)
• Extension port (When using GT25-W, port 2)
(2) GOT Ethernet common setting
Set the following setting which is common to the standard port and the extension port, or port 1 and port 2.
• [Default Gateway]
• [Peripheral S/W Communication Port No.]
• [Transparent Port No.]
(3) IP filter setting
By configuring the IP filter setting, the access from the specific IP address can be permitted or shut off.
For the detailed settings, refer to the following manual.
➠
1.1.2 GOT Ethernet Setting
Item Description Range
GOT Net No.
Set the network No. of the GOT.
(Default: 1)
1 to 239
GOT Station
*1
Set the station No. of the GOT.
(Default: 18)
1 to 120
GOT Communication Port No.
Set the GOT port No. for the connection with the Ethernet module.
(Default: 5033)
1024 to 5010, 5014 to 65534
(Except for 5011 to 5013,
49153 to 49170)
Retry
Set the number of retries to be performed when a communication timeout
occurs.
When receiving no response after retries, the communication times out.
(Default: 3times)
0 to 5times
Startup Time
Specify the time period from the GOT startup until GOT starts the
communication with the PLC CPU.
(Default: 3sec)
3 to 255sec
Timeout Time
Set the time period for a communication to time out.
(Default: 3sec)
1 to 90sec
Delay Time
Set the delay time for reducing the load of the network/destination PLC.
(Default: 0ms) 0 to 10000
(

10ms)