Mitsubishi Electric GOT2000 Series, Connection Manual

Page: 545 / 1224

9.4 PLC side setting when connecting to MELSECNET/H
9 - 21
MELSECNET/H C
O
NNE
CTION (PLC T
O
PLC N
ETWORK),
MELSECNET/10 CONNECTION (PLC T
O
PLC NETWORK)
9
(b) Network range assignment
: Necessary : As necessary : Not necessary
*1 Be sure to set the setting to perform the cyclic transmission.
*2 Set it when the MELSECNET/H network module is used in the redundant QnPRHCPU system.
POINT POINT POINT
When changing the network parameter
After writing the network parameter to the PLC CPU, operate the PLC CPU ether turning OFF
and then ON or resetting.
Item Set value
Setting necessity at GOT
connection
Monitoring time 200
LB/LW setting
*1
Send range
for station
(LB)
Station No.1
Start 0000H
End 00FFH
Station No.2
Start 0100H
End 01FFH
Send range
for station
(LW)
Station No.1
Start 0000H
End 00FFH
Station No.2
Start 0100H
End 01FFH
Pairing setting
*2
Disable
LX/LY setting
*1
No setting
Specify I/O master station
*1
No setting
Specify reserved station No setting
Supplementary setting
(Use default value)
Station inherent parameters