Mitsubishi Electric GOT2000 Series, Connection Manual

Page: 1018 / 1224

20 - 16
20.4 GOT Side Settings
20.4.2 Communication detail settings
Make the settings according to the usage environment.
■1.
Serial (MELSEC)
*1 The format setting differs depending on the controller.
L6ADP-R4 adapter: [2]
Other than L6ADP-R4 adapter: [1]
■2.
MELSEC-FX
Item Description Range
Transmission Speed
Set this item when change the transmission speed used for communication with the
connected equipment. (Default: 115200bps)
When the setting exceeds the limit of the connected equipment, communication is
performed at the fastest transmission speed supported by the connected equipment.
9600bps, 19200bps,
38400bps, 57600bps,
115200bps
Retry
Set the number of retries to be performed when a communication error occurs.
(Default: 0time)
0 to 5times
Timeout Time Set the time period for a communication to time out. (Default: 3sec) 3 to 30sec
Delay Time
Set this item to adjust the transmission timing of the communication request from the
GOT. (Default: 0ms)
0 to 300 (ms)
Format
*1
Set the communication format. (Default: 1) 1, 2
Item Description Range
Transmission Speed
Set this item when change the transmission speed used for communication with the
connected equipment. (Default: 115200bps)
When the setting exceeds the limit of the connected equipment, communication is
performed at the fastest transmission speed supported by the connected equipment.
9600bps, 19200bps,
38400bps, 57600bps,
115200bps
Retry
Set the number of retries to be performed when a communication error occurs.
(Default: 0time)
0 to 5times
Timeout Time Set the time period for a communication to time out. (Default: 3sec) 1 to 30sec
Delay Time
Set this item to adjust the transmission timing of the communication request from the
GOT. (Default: 0ms)
0 to 300 (ms)