Mitsubishi Electric GOT2000 Series, Connection Manual

Page: 300 / 1224

5 - 34
5.4 PLC Side Setting
5.4.2 Connecting to MELSEC iQ-R Series built-in Ethernet port CPU
(multiple connection)
This section describes the settings of the GOT and Built-in Ethernet port CPU in the following case of system configuration.
POINT POINT POINT
Built-in Ethernet port CPU
For details of Built-in Ethernet port CPU, refer to the following manual.
➠ Manuals of MELSEC iQ-R Series
Manuals of MELSEC iQ-F Series
■1.
GOT Side Communication format is UDP
(1) System configuration
(MELSEC iQ-R Series)
*1 These setting items do not exist at the PLC side. However, the virtual values must be set on the GOT side.
➠
(3) [Controller Setting] and [Ethernet] of GT Designer3
(2) [Module parameter] of GX Works3
(a) Built-in Ethernet port
(For MELSEC iQ-R Series)
Item Set value
Setting necessity at GOT
connection
IP Address 192.168.3.1
Subnet Mask -
Default Gateway -
<GOT>
(Use the default value for settings
other than the following.)
Network No. :1
PLC No. :1
IP address :192.168.3.18
Port No. :5001
Communication format :UDP (fixed)
Network No. :1 (virtual)
PLC No. :2 (virtual)
IP address :192.168.3.1
Port No. :5006 (fixed)
Communication format :UDP (fixed)
<Built-in Ethernet port CPU>
(Use the default value for settings
other than the following.)
1
Network No. :1 (virtual)
PLC No. :3 (virtual)
IP address :192.168.3.2
Port No. :5006 (fixed)
Communication format :UDP (fixed)
<Built-in Ethernet port CPU>
(Use the default value for settings
other than the following.)
2
*1
*1
*1
*1