Mitsubishi Electric GOT2000 Series, Connection Manual

Page: 468 / 1224

7 - 36
7.5 PLC Side Setting
7.5.2 Connecting serial communication module (Q, L Series)
POINT POINT POINT
(1) Serial communication module (Q, L Series)
For details of the serial communication module (Q, L Series), refer to the following manual.
➠ Q Corresponding Serial Communication Module User’s Manual (Basic)
➠
MELSEC-L Serial Communication Module User's Manual (Basic)
(2) Modem interface module
For details of the modem interface module, refer to the following manual.
➠ Modem Interface Module User's Manual
■1.
[Intelligent function module switch setting] on GX Developer
[The intelligent function module switch setting] on GX Developer is not necessary. (When no [intelligent function
module switch setting] is made, the module runs in the GX Developer connection mode.)
A module can be also connected to a GOT by making the following [intelligent function module switch setting] on GX
Developer.
(1) When connecting to the CH1 side
Switch
No.
Bit
Description
Set value
*3
Position Specified value
Switch 1
b0 OFF
CH1
transmission
settings
*1
Operation setting
(Operates according to
the GOT side
specifications.)
0000H
b1 OFF Data Bit
b2 OFF Parity Bit
b3 OFF Even/Odd parity
b4 OFF Stop bit
b5 OFF Sum check code
b6 OFF Write during RUN
b7 OFF Setting modifica-tions
b8 to b15 ―
CH1 transmission speed setting
*2
Switch 2 ― CH1 Communication protocol setting
GX Developer
connection
0000H
Switch 5 ― Station number setting 0th station 0000H