Mitsubishi Electric GOT2000 Series, Connection Manual

Page: 802 / 1224

14 - 46
14.3 Ethernet Connection
14.3 Ethernet Connection
14.3.1 Connection to FREQROL-A800/F800-E Series
*1 The destination connected with the twisted pair cable varies with the configuration of the applicable Ethernet network system.
Connect to the Ethernet module, hub, transceiver, or other system equipment corresponding to the applicable Ethernet network
system.
Use cables, connectors, and hubs that meet the IEEE802.3 10BASE-T/100BASE-TX standard.
*2 A straight cable is available.
When connecting CPU and GOT directly with Ethernet cable, remember that the by cross cable is available.
*3 A length between a hub and a node.
The maximum distance differs depending on the Ethernet device to be used.
The following shows the number of the connectable nodes when a repeater hub is used.
• 10BASE-T: Max. 4 nodes for a cascade connection (500m)
• 100BASE-TX: Max. 2 nodes for a cascade connection (205m)
When switching hubs are used, the cascade connection between the switching hubs has no logical limit for the number of
cascades.
For the limit, contact the switching hub manufacturer.
*4 GT25-W, GT2505-V does not support the option device.
PLC
Connection cable
*1*2
Maximum
segment
length
*3
GOT
Number of
connectable
equipment
Model name
Communication
type
Option device
*4
Model
FREQROL-A800-E
FREQROL-F800-E
Ethernet
• 100BASE-TX
Shielded twisted pair cable (STP) or
unshielded twisted pair cable (UTP) of
category 5 or higher
• 10BASE-T
Shielded twisted pair cable (STP) or
unshielded twisted pair cable (UTP) of
category 3 or higher
100m
- (Built into GOT)
16 GOTs
GT25-J71E71-
100
GOT
Connection cable
Inverter
Ethernet(FREQROL), Gateway
Communication driver