Mitsubishi Electric GOT2000 Series, Connection Manual

Page: 800 / 1224

14 - 44
14.2 System Configuration
14.2.9 Station number setting
Set each station number so that no station number overlaps.
The station number can be set without regard to the cable connection order. There is no problem even if station numbers
are not consecutive.
■1. Direct specification
When setting the device, specify the station number of the inverter of which data is to be changed.
■2. Indirect specification
When setting the device, indirectly specify the station number of the inverter of which data is to be changed using the
16-bit GOT internal data register (GD10 to GD25).
When specifying the station No. from 100 to 155 on GT Designer3, the value of GD10 to GD25 compatible to the
station No. specification will be the station No. of the inverter.
Specification range
0 to 31
Specification station NO. Compatible device Setting range
100 GD10
0 to 31
For the setting other than the above, error (dedicated device is out of range) will
occur.
101 GD11
102 GD12
103 GD13
104 GD14
105 GD15
106 GD16
107 GD17
108 GD18
109 GD19
110 GD20
111 GD21
112 GD22
113 GD23
114 GD24
115 GD25
GOT
Station
No.1 Station
No.0 Station
No.3 Station
No.21 Station
No.6
Examples of station number setting