Mitsubishi Electric GOT2000 Series, Connection Manual

Page: 1202 / 1224

22 - 146
22.7 Personal Computer Side Setting
22.7.19 Accessing by Setting/ Monitoring tool for C Controller module
The following shows the procedure to set the FA transparent function of Setting/Monitoring tool for C Controller module (Q
Series) with the C Controller module (Q24DHCCPU-V) connected.
■1.
When connecting the GOT and personal computer with USB
(1) When connecting the GOT and PLC in bus connection
Step 1.
Click the Connection Destination view [Connection Destination] [(Connection target data name)] in
the Navigation window of MT Setting/Monitoring tool for C Controller module.
Step 2.
The [Transfer Setup] is displayed.
Step 3.
Set the [Transfer Setup]:
PLC side I/F : GOT
Other station : No specification
Step 4.
Double-click [GOT] of the CPU side I/F to display [CPU side I/F Detailed Setting of GOT].
Step 5.
Mark the [via GOT(Bus) transparent mode] checkbox on the [CPU side I/F Detailed Setting of GOT]
screen.
Step 6.
The screen returns to [Transfer Setup]. Click [Connection Test] to check if Setting/Monitoring tool for C
Controller module has been connected to the motion controller (Q mode).