Mitsubishi Electric GOT2000 Series, Connection Manual

Page: 355 / 1224

5.4 PLC Side Setting
5 - 89
5
E
T
H
E
RNET CONNEC
T
ION
5.4.13 Connecting to Built-in Ethernet port FXCPU (FX3GE)
This section describes the settings of the GOT and Ethernet module (FX Series) in the following case of the system
configuration.
POINT POINT POINT
FX3GE
For details of FX3GE, refer to the following manual.
➠
FX3GE SERIES PROGRAMMABLE CONTROLLERS HARDWARE MANUAL
■1.
System configuration
*1 These setting items do not exist at the PLC side. However, the virtual values must be set on the GOT side.
➠
■ 4. [Controller Setting] and [Ethernet] of GT Designer3
■2.
Ethernet parameter settings of FX3GE
(1) Ethernet settings
Set the Ethernet parameter at [FX Parameter] on GX Works2.
To set FX3GE, GX Works2 Ver.1.91V or later is required.
For details on the setting of FX3GE, refer to the following manual.
➠
FX3GE SERIES PROGRAMMABLE CONTROLLERS HARDWARE MANUAL
Item Setting
Setting
(with GOT connected)
Channel CH1
IP Address
192.168.1.250
*1
Open Settings Refer to (2).
<GOT>
(The settings other than the
following are set to the default)
PLC No. : 1
IP address : 192.168.0.18
Port No. : 5019
Communication
format : TCP (fixed)
PC No. : 2 (virtual)
Network No. : 1 (virtual)
IP address : 192.168.0.19
Port No. : 5556 (fixed)
Communication
format : TCP (fixed)
<Ethernet module> (The settings other than the
following are set to the default)
*1
*1