Mitsubishi Electric GOT2000 Series, Connection Manual

Page: 610 / 1224

10 - 32
10.4 PLC Side Setting
(b) Network range assignment
: Necessary : As necessary : Not necessary
*1 Be sure to set it to perform the cyclic transmission.
POINT POINT POINT
When changing the network parameter
After writing the network parameter to the C Controller module (Q Series), either turn the C
Controller module (Q Series) OFF and then ON or reset it.
Item Set value
Setting necessity at GOT
connection
Total stations 2
LB/LW settings (1)
LB
Station No.1
Start 0000H
End 00FFH
Station No.2
Start 0100H
End 01FFH
LW
Station No.1
Start 00000H
End 000FFH
Station No.2
Start 00100H
End 001FFH
LX/LY settings
*1
No setting
Monitoring time (Use default value)
Specify I/O master station
*1
No setting
Specify reserved station No setting
Supplementary settings (Use default value)