Mitsubishi Electric GOT2000 Series, Connection Manual

Page: 665 / 1224

12.4 PLC Side Setting
12 - 23
CC-Link
C
O
NN
ECTION (INTELLIGE
NT DEVICE ST
A
T
ION)
12
12.4.3 Connecting to CC-Link module (MELSEC iQ-R Series) with Ver.1/Ver.2
compatibles mixed
This section describes the setting of the GOT and CC-Link module (MELSEC iQ-R Series) with Ver.1/Ver.2 compatibles
mixed in the following system configuration.
POINT POINT POINT
CC-Link module (MELSEC iQ-R Series)
For details of the CC-Link module (MELSEC iQ-R Series), refer to the following manual.
➠
Manuals of MELSEC iQ-R Series
■1. System configuration
*1 The CC-Link module is mounted on the base unit slot 0.
The Start I/O No. of the CC-Link module is set to "0".
■2.
Module parameter setting of GX Works3
(1) [Module parameter] of GX Works3
(a) Module parameter
: Necessary : As necessary : Not necessary
*1 Adjust the settings with GOT settings.
Item Set value Setting necessity at GOT connection
Station type Master station
Mode Remote net (Ver.2 mode)
Station No. 0 (fixed)
Transmission speed
*1
156kbps
Parameter setting Parameter
<CC-Link module> *1
Type : Master station
Station No. : Station No.0
Mode Setting : Remote net (Ver.2 mode)
All connect count : 2
Transmission speed : 156kbps
<GOT(Ver.1 compatible)>
(Use the default value for
settings other than the following.)
Station type : Intelligent
device station
Station No. : Station No.1
Number of
stations occupied Exclusive station 1
:
: Transmission speed 156kbps
(Use the default value for settings other than the following.)
<GOT(Ver.2 compatible)>
(Use the default value for
settings other than the following.)
Station type : Intelligent
device station
Station No. : Station No.2
Number of
stations occupied Exclusive
station 1
:
Expanded cyclic
setting Single :
Transmission speed : 156kbps