Mitsubishi Electric GOT2000 Series, Connection Manual

Page: 1106 / 1224

22 - 50
22.4 System Configuration
■3.
When connecting the GOT and the personal computer by wireless LAN
*1 LCPU is not applicable to the bus connection.
*2 Set the wireless LAN. For details, refer to the following manual.
➠
GT Designer3 (GOT2000) Screen Design Manual
*3 When the [Access point] is set to the [Operation mode] using the wireless LAN function for the GOT, the wireless LAN access
point is not required.
*4 GT25-W, GT2505-V is not applicable to the bus connection.
22.4.5 FR Configurator
PLC GOT Wireless LAN access point Personal computer Number of
connectable
equipment
Connection type Model Option device Model name Software
For the system configuration
between
the GOT and PLC, refer to the
following.
➠
BUS CONNECTION
*1
➠
DIRECT CONNECTION
TO CPU
*2*4
GT25-WLAN
For the wireless LAN access point,
use the access point compatible
with IEEE802.11b/g/n.
MR Configurator2
1 personal
computer for 1 GOT
*3
Inverter GOT Connection cable
Personal
computer
Number of
connectable
equipment
Connection type Model Interface Cable model
Max.
distance
Software
For details on the system configuration
between GOT and Mitsubishi Electric
inverter, refer to the following.
➠
INVERTER CONNECTION
USB
GT09-C30USB-5P(3m)
GT09-C20USB-5P(2m)
3m FR Configurator
1 personal
computer for 1 GOT
Connection type
dependant
Communication driver
Wireless LAN
access point
GOT
Servo
amplifier
PC
Varies according to
the connection type.
, SSCNET /H
Servo
amplifier
Wireless LAN
Communication
Unit
QCPU +
Motion controller
CPU (Q series)
Inverter GOT
Varies according to
the connection type.
Inverter
PC
Connection cable
FREQROL 500/700/800,
SENSORLESS SERVO
Communication driver