Mitsubishi Electric GOT2000 Series, Connection Manual

Page: 710 / 1224

12 - 68
12.4 PLC Side Setting
(2) Program condition (for FROM/TO instruction)
This program writes parameters to the buffer memory when PLC CPU status changes from STOP to RUN and
automatically starts the data link with FROM/TO instruction.
(a) I/O signal of CC-Link module
➠ Control & Communication Link System Master/Local Module Type AJ61BT11/A1SJ61BT11
User's Manual
(b) Devices used by user
(c) Buffer memory settings used in the present example
*1 Details for the station data are shown below.
For 1) and 2), set the same station No. and number of station occupied settings as those of the GOT.
For 3), the setting is fixed.
Device Application
M100, M101 Flag for parameter setting
M102, M103 Flag for data link startup
D0 Number of connected modules
D1 Number of retry
D2 Automatic reconnection station count
D3 Operation specification in the case of CPU failure
D4 Reserved station specification (Station No. 1 to Station No. 16)
D5 Error invalid station specification (Station No. 1 to Station No. 16)
D6 Station data (first module)
D400 Error code in the case of data link startup failure
Buffer memory
address
Item Set value
Decimal (Hex)
1 (1H) Number of connected modules 1 (1 module)
2 (2H) Number of retry 3 (3times)
3 (3H) Automatic reconnection station count 1 (1 station)
6 (6H) Operation specification in the case of CPU failure 0 (stop)
16 (10H) Reserved station specification (Station No. 1 to Station No. 16) 0 (No specification)
20 (14H)
Error invalid station specification
(Station No. 1 to Station No. 16)
0 (No specification)
32 (20H)
Station data (first module)
*1
2101H
1) Station No. (Set the same station No. as that of the GOT.)
01H to 40H: Station No. 1 to Station No. 64
2) Number of stations occupied (Set the same setting of the number of station occupied as that of the GOT.)
1H: Exclusive station 1
2H: Exclusive station 2
3H: Exclusive station 3
4H: Exclusive station 4
3) Station type (2H: Set it to intelligent device station.)
0H: Remote I/O station
1H: Remote device station
2H: Intelligent device station (Incl. local station)
b15 b12 to b11 b8 to b7 to b0
3) 2) 1)