Mitsubishi Electric GOT2000 Series, Connection Manual

Page: 597 / 1224

10.4 PLC Side Setting
10 - 19
CC-Link
IE C
O
NTROLLER NETWOR
K CON
N
ECTION
10
(c) Routing setting
Up to 238 [Target Station Network No.]s can be set.
However, the same target station network number cannot be set twice or more (multiple times).
Therefore, the one that can access to other station from the request source host GOT is 238 kinds of [Target
Station Network No.]s.
POINT POINT POINT
Routing parameter setting of request source
Routing parameter setting is also necessary for the request source GOT.
For the setting, refer to the following.
➠
10.3.3 Routing parameter setting
(2) [Controller Setting] of GT Designer3
POINT POINT POINT
Network type of the GOT side
When the network is in the extended mode, be sure to set the network type of the GOT side to
[CC IE Control extended mode].
For [Controller Setting], of GT Designer3, refer to the following.
➠
10.3.1 Setting communication interface (Controller Setting)
Item Range
Target Station network No. 1 to 239
Relay Station network No. 1 to 239
Relay station No. 0 to 120
Item Set value
Network type CC IE Control extended mode
Network No. 1: Network No.1
Station No. 2: Station No.2
Group No. 0 (fixed)
Mode Online (auto. reconnection)
Refresh Interval 1ms (Use default value)
Retry 3times (Use default value)
Timeout Time 3sec (Use default value)
Delay Time 0ms (Use default value)
Monitor Speed High (Normal) (Use default value)