Mitsubishi Electric GOT2000 Series, Connection Manual

Page: 631 / 1224

11.4 PLC Side Setting
11 - 15
CC
-Link IE FIELD NETWOR
K CON
N
ECTION
11
(b) Network Configuration Settings
: Necessary : As necessary : Not necessary
*1 Be sure to set it to perform the cyclic transmission.
POINT POINT POINT
(1) When changing the module parameter
After writing module parameters to the PLC CPU, turn the PLC CPU OFF then back ON
again, or reset the PLC CPU.
(2) GOT station type
Set the GOT as an intelligent device station.
(c) Routing setting
Up to 238 [Target Station Network No.]s can be set.
However, the same target station network number cannot be set twice or more (multiple times).
Therefore, the one that can access to other station from the request source host GOT is 238 kinds of [Target
Station Network No.]s.
Item Set value Setting necessity at GOT connection
Rx/RY, RWw/RWr
setting(1)
*1
Rx/RY setting Station No.1
Start 0000H
End 00FFH
RWw/RWr setting Station No.1
Start 00000H
End 00007H
Reserved/Error Invalid Station No setting
Item Range
Target Station network No. 1 to 239
Relay Station network No. 1 to 239
Relay Station No. 0 to 120