Mitsubishi Electric GOT2000 Series, Connection Manual

Page: 125 / 1224

2.3 MELSEC iQ-F
2 - 41
2
DE
VICE RANGE THA
T
CAN BE SE
T
• PB, PC, PE: 1 to 64
• PD, PF, PL: 1 to 48
Use the following devices to write data to the E2PROM of a servo amplifier.
• PA: 1001 to 1032
• PB, PC, PE: 1001 to 1064
• PD, PF, PL: 1001 to 1048
*7 For the servo amplifier, if a real number is written to the device, only the integer portion of the number is stored in the device.
If the data type of the servo amplifier device is set to [Real], the value after the writing may differ from the one before the writing.
In addition, the monitoring performance may slow down.
Therefore, select one of the following items for the data type of the device.
• [Signed BIN16]
• [Unsigned BIN16]
• [Signed BIN32]
• [Unsigned BIN 32]
When you use the value of the servo amplifier device, remember that only the integer portion of the value is stored in the device.
To display a real number on the numerical display or numerical input object, set [Format] to [Real] and select [Adjust Decimal
Point Range] in the object setting.
*8 Only the own station can be monitored. An error will occur if another station is monitored.
*9 Monitoring or writing is not possible in the continuous device designation mode by GT21.