Mitsubishi Electric GOT2000 Series, Connection Manual

Page: 633 / 1224

11.4 PLC Side Setting
11 - 17
CC
-Link IE FIELD NETWOR
K CON
N
ECTION
11
11.4.2 Connection to C Controller module (MELSEC iQ-R Series)
This section describes the settings of the GOT and C Controller module (MELSEC iQ-R Series) in the following case of
system configuration.
Use CW Configurator for the C Controller module (MELSEC iQ-R Series) communication settings.
■1.
System configuration (Network Type: CC IE Field)
*1 The CC-Link IE Field Network module is mounted on slot 0 of the base unit.
The Start I/O No. of the CC-Link IE Field Network module is set at "0".
■2. Module parameter settings of System configuration (Network Type: CC IE Field)
(1) [Module parameter] of CW Configurator
(a) Module parameter
: Necessary : As necessary : Not necessary
*1 Specify the same network No. as that of the GOT.
Item Set value
Setting necessity at GOT
connection
Station type Master station (fixed)
Network No.
*1
1
Station No. 0 (fixed)
Parameter setting Parameter
Channel No. (Use default value)
Network Configuration Settings Refer to (b)
<CC-Link IE Field Network module>
(Use the default value for settings other than the following.)
Station No.
:0 (fixed)
Mode Setting :Online (normal)
Network type :CC IE Field (Master station)
Network No. :1
Total stations :1
Network Configuration Settings :RX/RY00
H
to FFH
RW
W/
RW
r
00
H
to FFH
CC-Link IE Field Network
<GOT>
(Use the default value for settings other than
the following.)
Network type :CC IE Field
Network No. :1
Station No. :1
Mode Setting :Online
Network Configuration Settings :RX/RY00 to FFH
RW
W/
RW
r
00 to FFH
Monitor Speed :High
*1