Mitsubishi Electric GOT2000 Series, Connection Manual

Page: 599 / 1224

10.4 PLC Side Setting
10 - 21
CC-Link
IE C
O
NTROLLER NETWOR
K CON
N
ECTION
10
■3.
Parameter settings (Connecting to MELSEC iQ-R series) of System configuration1
(Network Type: CC IE Control)
(1) [Module parameter] of CW Configurator
(a) Module parameter
: Necessary : As necessary : Not necessary
*1 Specify the same network No. as that of the GOT.
(b) Network range assignment
: Necessary : As necessary : Not necessary
*1 Be sure to set it to perform the cyclic transmission.
Item Set value Setting necessity at GOT connection
Station type Control station (fixed)
Network No.
*1
1
Station number setting 1
Network range assignment Refer to (b)
Channel No. (Use default value)
Item Set value Setting necessity at GOT connection
LB/LW setting
(1)
*1
LB
Station No.1
Start 0000H
End 00FFH
Station No.2
Start 0100H
End 01FFH
LW
Station No.1
Start 00000H
End 000FFH
Station No.2
Start 00100H
End 001FFH
LB/LW setting (2)
*1
No setting
LX/LY setting (1)
*1
No setting
LX/LY setting (2)
*1
No setting
Reserved station
(Use default value)
Pairing