Mitsubishi Electric GOT2000 Series, Connection Manual

Page: 151 / 1224

2.9 MELSEC-WS
2 - 67
2
DE
VICE RANGE THA
T
CAN BE SE
T
2.9 MELSEC-WS
The device ranges that can be set when selecting [MELSEC-WS] as the controller type are as follows.
POINT POINT POINT
(1) Devices of MELSEC-WS
Only reading is possible for all devices.
(2) Device settings of MELSEC-WS
• Input(I), Output(Q)
• Logic result(LQ), Logic input(LI)
• EFI input(EI)
• EFI output(EQ)
Device Setting range
Device No.
representation
Bit device
Input (I) I1.1 to I12.8
Decimal
+Decimal
Output (Q) Q1.1 to Q12.8
Logic result (LQ) LQ0.0 to LQ3.7
Logic input (LI) LI0.0 to LI3.7
The bit specification of the word device Setting range of each word device -
Word device
Data (byte)(D) D0 to D99
Decimal
Data (word)(W) W0 to W49
EFI input (byte)(EI) EI110 to EI233
Decimal
+Decimal
+Decimal
EFI output (byte)(EQ) EQ10 to EQ22
Decimal
+Decimal
Logic input (byte)(LD) LD0 to LD3 Decimal
Logic input (word)(LW) LW0 to LW1 Decimal
Device
name
Input position(1 to 8)
Module number(1 to 12)
Device
name
Bit position(0 to 7)
Byte number(0 to 3)
Device
name
Device number(1 to 3)
Byte number(0 to 3)
EFI number(1 to 2)
Device
name
EFI number(1 to 3)
Byte number(0 to 2)