Mitsubishi Electric GOT2000 Series, Connection Manual

Page: 87 / 1224

2 - 3
2
DE
VICE RANGE THA
T
CAN BE SE
T
■1.
Setting item
(For MELSEC-Q/QS, Q17nD/M/NC/DR, CRnD-700)
(For MELSEC-FX)
Item Description
Device
Set the device name, device number, and bit number.
The bit number can be set only by specifying the bit of word device.
When setting buffer memory (BM) and (G), set the buffer memory address in the space for the device number.
[R Block]
Set the block number of the extended file register.
This item can be set only when the extended file register (ER) is selected.
[SFC Block No.]
This item can be set only when the step relay (block) (BLS) is selected.
Set the block number of the step relay (block).
Intelligent
function
module
[Unit top I/O]
Set when the buffer memory (BM) is selected.
Set the head I/O number of the buffer memory for the intelligent function module.
Set the first 2 digits of the 3-digit head I/O number.
[Unit No.]
Set when the buffer memory (G) is selected.
Set the head I/O number of the buffer memory for the intelligent function module.
Set the first 2 digits of the 3-digit head I/O number.
MELSEC-
FX buffer
memory
[Mask type]
Set for using the buffer memory of MELSEC-FX series.2
Set the mask type for monitoring or writing only specified bits of the buffer memory.
➠
(4)Setting of the mask type (MELSEC-FX)
[Unit No.]
Set for using the buffer memory of MELSEC-FX series.
Set the module No. of the special function unit or special function block to monitor or write.
➠
(5)Setting of the module No. (MELSEC-FX)
When selecting a servo amplifier device for the following controllers
MELSEC iQ-R, RnMT
MELSEC iQ-F
MELSEC-Q/QS, Q17nD/M/NC/DR, CRnD-700
MELSEC-L
When selecting buffer memory (G) with the following controllers
MELSEC iQ-R, RnMT
MELSEC iQ-F
MELSEC-Q/QS, Q17nD/M/NC/DR, CRnD-700
MELSEC-L
MELSEC-QnA, MELDAS C6 *