Mitsubishi Electric GOT2000 Series, Connection Manual

Page: 297 / 1224

5.4 PLC Side Setting
5 - 31
5
E
T
H
E
RNET CONNEC
T
ION
■2.
GOT Side Communication format is TCP
(1) System configuration
For connecting one Built-in Ethernet port CPU to one GOT, the PLC side settings are not required. Set [Ethernet] for
[Controller Setting] on GT Designer3, and then connect Built-in Ethernet port CPU to the GOT.
*1 For the settings when using system devices including a hub and a transceiver, refer to the following.
➠
5.4.7 Connecting to MELSEC-Q/L Series built-in Ethernet port CPU (multiple connection)
*2 These setting items do not exist at the PLC side. However, the virtual values must be set on the GOT side.
➠
■ (3) [Controller Setting] and [Ethernet] of GT Designer3
(2) [Module parameter] of GX Works3
(a) Built-in Ethernet port
○ : Necessary

: As necessary ×: Not necessary
Item Set value Setting necessity at GOT connection
IP Address
192.168.3.39
(Use default value)

Subnet Mask - ×
Default Gateway - ×
Communication data code (Use default value)

External Device Configuration
➠
(b) External Device Configuration
○
<GOT>
(Use the default value for settings other
than the following.)
Network No. :1
PLC No. :1
IP address :192.168.3.18
Port No. :5001
Communication format :TCP (fixed)
<Built-in Ethernet port CPU>
*1
(Use the default value for settings other
than the following.)
Network No. :1 (virtual)
*2
PLC No. :2 (virtual) *2
IP address :192.168.3.39