manualshive.com logo in svg

Fujitsu MB86R02, Hardware Manual

The Fujitsu MB86R02 Application Note manual is available for free download on manualshive.com. This comprehensive user manual provides detailed instructions and insights on using the MB86R02 product, ensuring users can fully leverage its features and capabilities. Enhance your product experience by accessing this informative manual today.

Share
Download
background image

 

 

27-27 

MB86R02 ‘Jade-D’ Hardware Manual V1.64 
 

 

Transfer setting 

Operation 

Master mode (MSMD = 1) 

Slave mode (MSMD = 0) 

Stop 

Stop operation has following states: 
Transmission stop: 
Transmission FIFO becomes empty 
without sending data from internal 
memory to I2S transmission FIFO. 
Reception stop: 
Data does not need to be transferred 
from I2S reception FIFO to internal 
memory. 
 

To maintain start bit to "1" 

Keep outputting frame synchronous 
signal in the free-running mode.  In 
the burst mode, do not output the 
signal when transmission FIFO 
becomes empty. 
Transmission stop: 
TXENB = 1: Keep outputting empty 
frame bit when transmission FIFO 
becomes empty. 
TXENB = 0: Transmission FIFO 
becomes empty and transmission 
serial data bus becomes in high 
impedance.    Do not send the data 
in transmission FIFO at writing "0" to 
TXENB.    Writing to transmission 
FIFO stops. 
Reception stop: 
Write "0" to RXENB, then reception 
FIFO becomes empty and frame 
reception operation stops. 

 
To make start bit "0" 

Write "0" to start bit, then 
transmission/reception FIFO 
becomes empty.     
The clock supply to the internal 
serial control part stops regardless 
of TXENB and RXENB statuses as 
well as I2S_SCKX output to the 
external part and frame synchronous 
signal output.

 

To maintain start bit to "1" 

Transmission stop: 
Keep outputting empty frame bit after 
transmission FIFO becomes empty in 
order to maintain this bit to TXENB = 
1.    When the value is changed to "0", 
transmission FIFO becomes empty 
and transmission serial data bus 
becomes in high impedance.    Do not 
send the data in transmission FIFO at 
writing "0" to TXENB.    Stop writing to 
transmission FIFO. 
Reception stop: 
Write "0" to RXENB, then reception 
FIFO becomes empty and frame 
reception operation stops. 
 

To make start bit "0" 

Write "0" to start bit, then 
transmission/reception FIFO 
becomes empty.  Stop transmission/ 
reception regardless of TXENB and 
RXENB statuses. 

Abnormality 

When reading to transmission FIFO 
occurs with having it empty, output 
empty frame bit.   
When writing to transmission FIFO 
occurs with having it full, set 
TXOVR to "1".     
If read access to reception FIFO 
occurs while it is empty, set RXUDR 
of STATUS register to "1".   
If writing to reception FIFO occurs 
with having it full, set RXOVR of the 
register to "1". 

 

When reading to transmission FIFO 
occurs with having it empty, output 
empty frame bit.   
When writing to transmission FIFO 
occurs with having it full, set TXOVR 
to "1".    When read access occurs to 
reception FIFO with having it empty, 
set RXUDR of STATUS register to 
"1". 
When writing to reception FIFO 
occurs with having it full, set RXOVR 
of the register to "1".   
 
If it is not input with the frame rate 
defined frame synchronous signal in 
the free-running mode, set FERR bit 
of the register to "1".   
If the next frame synchronous signal 
is input before completing 1 frame 
transmission in the burst mode, set 
FERR bit of the register to "1". 

Summary of Contents for MB86R02





























































































































































































































































































































































































































































































































































































































































































































































































































































































































Reviews:

No comments

Related manuals for MB86R02

Panasonic FP0 Series Specifications preview
FP0 Series
Brand: Panasonic Pages: 27
Panasonic CZ-64ESMC2 Instruction Manual preview
CZ-64ESMC2
Brand: Panasonic Pages: 78
Panasonic GM1 Series Reference Manual preview
GM1 Series
Brand: Panasonic Pages: 98
NAiS FP0 Series Hardware Manual preview
FP0 Series
Brand: NAiS Pages: 173
Panasonic SL-VGU1-EC Instruction Manual preview
SL-VGU1-EC
Brand: Panasonic Pages: 2
Danfoss VLT MCD 200 Installation Manual preview
VLT MCD 200
Brand: Danfoss Pages: 32
Danfoss VLT AutomationDrive FC 360 Programming Manual preview
VLT AutomationDrive FC 360
Brand: Danfoss Pages: 60
Danfoss AMV 110 NL AQT Datasheet preview
AMV 110 NL AQT
Brand: Danfoss Pages: 4
Danfoss ECL Comfort 110 Quick Manual preview
ECL Comfort 110
Brand: Danfoss Pages: 2
Hach sc200 Software Update preview
sc200
Brand: Hach Pages: 2
Hach ORBISPHERE 410 Quick Operator'S Manual preview
ORBISPHERE 410
Brand: Hach Pages: 12
Hach AS950 AWRS Basic Operations preview
AS950 AWRS
Brand: Hach Pages: 472
Hach sc1000 User Manual preview
sc1000
Brand: Hach Pages: 64
Hach SC4500 Basic User Manual preview
SC4500
Brand: Hach Pages: 210
Uclear Motion Series User Manual preview
Motion Series
Brand: Uclear Pages: 40
MAKOT UMS-02 Manual preview
UMS-02
Brand: MAKOT Pages: 6
Vaillant VRT 350f Installation Instructions Manual preview
VRT 350f
Brand: Vaillant Pages: 36
Vaillant VRT 350 Installation Instructions Manual preview
VRT 350
Brand: Vaillant Pages: 28

Brands by name

Popular brands

Load more brands