Goodrive350A series high-performance multifunction VFD
Basic operation guidelines
-32-
Item
Description
setting, confirming parameter selection, and
entering the next menu.
9
Run key
When the VFD is controlled by the keypad,
this key is used to run the VFD or perform
autotuning.
10
Stop/
Reset key
In running state, pressing this key can stop
running or autotuning; this key is limited by
P07.04. In fault alarm state, all the control
modes can be reset by this key.
11
Direction key
Up:
Down:
Left:
Right:
Up: Its function varies with the interface
(Example: shifting up the displayed/selected
item and changing digits)
Down: Its function varies with the interface
(Example: shifting down the
displayed/selected item and changing digits)
Left: Its function varies with the interface
(Example: switching the monitoring interface,
shifting the cursor leftward, and returning to
the previous menu)
Right: Its function varies with the interface
(Example: switching the monitoring interface,
shifting the cursor rightward, and entering the
next menu)
Display
area
12
LCD
Display
screen
240*160 dot-matrix LCD, able to display three
monitoring parameters or six sub-menu items
simultaneously.
Other
13
RJ45
interface
RJ45 interface
The RJ45 interface is used to connect to the
VFD.
14
Battery
cover
Clock battery
cover
To replace or mount the clock battery, remove
this cover, and then close the cover after the
battery is mounted.
15
USB
terminal
Mini USB
terminal
The mini USB terminal is used to connect to
the USB flash drive through an adapter.
The LCD has different display areas, which show different contents under different interfaces. The
following figure shows the main interface in stop state.
