Goodrive350A series high-performance multifunction VFD
Function parameter list
-171-
Function
code
Name
Description
Default
Modify
30: Acceleration/deceleration disabled
31: Counter trigger
32: Reserved
33: Clear frequency increase/decrease
setting temporarily
34: DC brake
35: Switch from motor 1 to motor 2
36: Command switches to keypad
37: Command switches to terminal
38: Command switches to communication
39: Pre-exciting command
40: Zero out power consumption quantity
41: Maintain power consumption quantity
42: Switching the upper torque limit setting
mode to keypad
43: Position reference point input (valid only
for S1, S2 and S3 are valid)
44: Spindle orientation disabled
45: Spindle zeroing/local positioning zeroing
46: Spindle zero position selection 1
47: Spindle zero position selection 2
48: Spindle scale division selection 1
49: Spindle scale division selection 2
50: Spindle scale division selection 3
51: Terminal for switching between position
control and speed control
52: Pulse input disabled
53: Clear position deviation cleared
54: Switch over position proportional gain
55: Enable cyclic positioning of digital position
positioning
56: Emergency stop
57: Motor over-temperature fault input
58: Enable rigid tapping
59: Switch to V/F control
60: Switch to FVC control
61: PID polarity switchover
62: Reserved
