Goodrive350A series high-performance multifunction VFD
Basic operation guidelines
-44-
"×" indicates the set value of this parameter cannot be modified under the present state.
"Present" indicates the present value.
"Default" indicates the default value of this parameter.
5.4.6 Editing parameters in parameter groups
You can choose
Menu
>
Parameter groups
, enter a specific function group and then a specific
function code, and then press
key,
key or
key to edit the parameter setting
interface. After entering edit interface, set the parameter from low bit to high bit, and the bit under
setting will be highlighted. Press
key or
key to increase or decrease theparameter value
(this operation is valid until the parameter value exceeds the max. value or min. value); press
or
to shift the editing bit. After parameters are set, press
or
key to save the set
parameters and return to the previous menu; press
to maintain the original parameter value
and return to the previous menu.
GD350A
16:02:35
Fwd
Local
Ready
P00.00: Speed Ctrl Run Cmd
P00.01: Run Cmd Channel
P00.02: Comm Cmd Channel
P00.03: Max. Output Freq
P00.04: RunFreq Up Limit
P00.05: RunFreq Low Limit
Max. Output Freq Hz
050.0
0
Max : 630.00
Min : 50.00
Present
：
50.00
Auth:
√
Default : 50.00
Max. output frequency Hz
050.0
1
Present
：
50.00
Auth:
√
Edit
Back
Sele
Home
Back
OK
Home
Back
OK
Max : 630.00
Min : 50.00
Default : 50.00
Figure 5.16 Editing parameters in parameter groups
In the parameter edit interface, the "Auth" field on the top right indicates whether this parameter can
be modified or not.
"
√
" indicates the set value of this parameter can be modified under the present state.
"×" indicates the set value of this parameter cannot be modified under the present state.
"Present" indicates the present value.
"Default" indicates the default value of this parameter.
5.4.7 Monitoring states
You can choose
Menu
>
State monitoring
>
State monitoring
parameter
, enter a specific function
group and then a specific function code, and press
key,
key or
key to enter the
state monitoring interface. After entering the state monitoring interface, the actual parameter value will
be displayed in real time, this value is the actually detected value which cannot be modified.
In the state monitoring interface, you can press
key or
key to return to the previous
menu.
