INVT GD350A-004G/5R5P-4, Руководство по эксплуатации

Страница: 169 / 425

Goodrive350A series high-performance multifunction VFD Function parameter list
-164-
Function
code
Name Description Default Modify
P04.09
V/F slip
compensation gain
of motor 1
Used to compensate for the motor rotating
speed change caused by load change in the
space voltage vector mode, and thus improve
the rigidity of the mechanical characteristics
of the motor. You need to calculate the rated
slip frequency of the motor as follows:
△ f=fb-n*p/60
Of which, f
b
is the rated frequency of motor 1,
corresponding to function code P02.02. n is
the rated rotating speed of motor 1,
corresponding to function code P02.03. p is
the number of pole pairs of the motor. 100.0%
corresponds to the rated slip frequency △ f of
motor 1.
Setting range: 0.0
–200.0%
100.0%
○
P04.10
Low-frequency
oscillation control
factor of motor 1
In space voltage vector control mode, the
motor, especially the large-power motor, may
experience current oscillation at certain
frequencies, which may cause unstable motor
running, or even VFD overcurrent. You can
adjust the two function codes properly to
eliminate such phenomenon.
Setting range of P04.10: 0
–100
Setting range of P04.11: 0
–100
Setting range of P04.12: 0.00Hz
–P00.03
(Max. output frequency)
10
○
P04.11
High-frequency
oscillation control
factor of motor 1
10
○
P04.12
Oscillation control
threshold of motor 1
30.00Hz
○
P04.13
V/F curve setting of
motor 2
This group of function code defines the V/F
curve of motor 2 to meet the needs of
different loads.
0: Straight-line V/F curve
1: Multi-point V/F curve
2: Torque-down V/F curve (power of 1.3)
3: Torque-down V/F curve (power of 1.7)
4: Torque-down V/F curve (power of 2.0)
5: Customized V/F curve (V/F separation)
Note: Refer to the description for P04.00.
0
◎
P04.14
Torque boost of
motor 2
Note: Refer to the descriptions for P04.01 and
P04.02.
0.0%
○