Autodesk 00128-051462-9310 - AUTOCAD 2008 COMM UPG FRM 2005 DVD, User Manual

Page: 934 / 2268

Viewing edit in-place grips for adding and removing bays
5 Edit the division:
Then … If you want to …
click the Add Bay grip. add a bay to the grid
click the Remove Bay grip. remove a bay from the grid
select the Start Offset grip and move it to the position. change the start offset of the grid
select the End Offset grip and move it to the position. change the end offset of the grid
click the Auto Grid Bay Spacing grip and move it to the
position. change the spacing of bays
right-click and click Convert To Manual. You can manually
add and remove gridlines, change the offsets, and change
the position of individual gridlines. manually edit the grid
click the Set Fixed Cell Dimension Rules command grip, and
edit the values in the worksheet. use a worksheet to edit the cell dimensions
6 Save or discard changes to the curtain wall unit grid:
Then … If you want to exit the in-place editing session …
click on the In-Place Edit toolbar.
without saving your changes
click on the In-Place Edit toolbar. If you edited the
grid by instance, the changes are saved to the design rules
for the individual grid. If you edited the curtain wall unit style,
the Save Changes dialog box is displayed.
after saving your changes
7 In the Save Changes dialog box, specify to which division to save the changes:
Then … If you want to …
verify the current division is selected for Save Changes to
Existing Division, and click Save. The changes are made in
the style and affect all curtain wall units of that style in the
drawing. save the changes to the style in the current curtain wall unit
division
click New, enter a name for the new division override, and
click OK. Click Save. The changes are saved as an override to
the style, and affect only the curtain wall units to which the
override is applied. create an override to the style by saving the changes in a new
curtain wall unit division
894 | Chapter 19 Curtain Walls