Autodesk 00128-051462-9310 - AUTOCAD 2008 COMM UPG FRM 2005 DVD, User Manual

Page: 1000 / 2268

Then… If you want to…
click and specify values on the Design Rules worksheet.
For more information, see “ Adding a New Frame Assignment to a Door and
Window Assembly Grid ” on page 945 .
create and assign a new frame definition for
the new grid created after the cell is
subdivided
select the mullion definition. select a mullion definition for the grid created
after the cell is subdivided
click and specify values on the Design Rules worksheet.
For more information, see “ Adding a New Mullion Assignment to a Door
and Window Assembly Style ” on page 947 .
create and assign a new mullion definition
to the selected grid
select Replace Cell. replace the existing cell infill with the options
selected on this worksheet
select Continue Grid Editing. continue in-place editing the grid after the
cell is subdivided
7 Click OK.
8 Press
ENTER
.
Overriding Door and Window Assembly Frames and Mullions
You can change a selected frame edge or mullion edge by using an edge assignment override.
NOTE To exchange a frame edge or mullion edge, the new edge definition must already be defined in the door/window
assembly style.
Removing the edge does not affect the width of the cell. To remove the edge and have the adjacent cell resize, create
an edge definition with a width and depth of zero. For more information, see “
Defining a Door and Window Assembly
Frame by Width and Depth ” on page 928 or “ Defining Door and Window Assembly Mullions by Width and Depth ” on
page 932.
You can also create a new edge profile by drawing a polyline or using an existing profile in the drawing. This edge
profile can be interactively edited onscreen by in-place editing.
Creating a Frame or Mullion Override
Use this procedure to select a different element definition for a selected frame edge or mullion by using an edge
assignment override.
To exchange a frame or mullion, the new definition must already be defined in the door/window assembly style. For
information on creating frames and mullions, see “
Defining Door and Window Assembly Frames ” on page 928 and
“ Defining Door and Window Assembly Mullions ” on page 932.
Overriding a Door/Window Assembly frame definition
1 Select the door/window assembly on which you want to override an edge.
2 Right-click, and click Frame/Mullion
➤
Override Assignment.
960 | Chapter 20 Door and Window Assemblies