Autodesk 00128-051462-9310 - AUTOCAD 2008 COMM UPG FRM 2005 DVD, User Manual

Page: 1277 / 2268

4 Click the Stringers tab.
If the style does not use stringers, proceed to step 6.
5 Add or remove stringers:
Then… If you want to…
click Add. add a stringer to the stair style
select the stringer you want to duplicate, and click Copy. add an identical stringer to the list
select the stringer, and click Remove. delete a stringer from the list
6 Specify the properties of each stringer:
Then… If you want to…
select the current name, and enter a new name. specify the name of a stringer
click the current Type, and select Saddled or Housed. specify the type of stringer
click the current alignment, and select Align Left, Align Right,
Center, or Full Width. specify the alignment of a stringer
enter a value for Width. specify the width of a stringer
enter a value for Offset. specify the offset of a stringer
under Flight, enter a value for Waist. specify the flight waist
under Flight, enter a value for Total. specify the flight total
under Landing, enter a value for Waist. specify the landing waist
under Landing, enter a value for Total. specify the landing total
select Truncate for Cleanup. stop the stringer at a landing
select Cleanup for Cleanup. allow the stringer to continue under a landing
clear Curve center stringer at turns specify mitered corners for a center stringer at a turn or
landing
7 Click Slab for Type to edit the slab settings:
Then… If you want to…
under Flight, enter a value for Waist. specify the thickness of the slab at flights
Specifying the Stringers of a Stair Style | 1237